| Uimhir Pháirt | NE133QUB-N01 |
| Branda | BOE |
| Méid | 13.3 |
| Iarratas | 3D Printer |
| Rún | 38403×2160 |
| Comhdhéanamh | CELL , Oxide TFT-L |
| Gile | |
| CR | - |
| Dathanna | Grayscale |
| Cúlsolas | No |
| Comhéadan | eDP |
| monaróir | BOE |
| ainm samhail | NE133QUB-N01 (BOE093B) |
| méid scáileáin | 13.3 inch |
| cineál scáileáin | CELL , Oxide TFT-LCD |
| uimhir picteilín | 3840(3)×2160 (UHD) 332PPI |
| socrú | LCR Vertical Stripe |
| limistéar gníomhach(mm) | 293.76 × 165.24 (H×V) |
| imlíne (mm) | 297.76 × 173.04 × 1.25 (H×V×D) |
| limistéar bezel (mm) | - |
| cóireáil | Antiglare (Haze 25%), Hard coating (3H) |
| luminance | 0 cd/m² |
| cóimheas codarsnachta | - |
| uillinn féachana | 85/85/85/85 (Typ.)(CR≥10) |
| freagra | 25 (Typ.)(Tr+Td) ms |
| radharc maith ag | Symmetry |
| modh oibre | ADS, Normally Black, Transmissive |
| tiús gloine | 0.50+0.50 mm |
| transmissivity | - |
| doimhneacht dath | Grayscale |
| cúlsolas | No B/L |
| mais | 167g (Max.) |
| a úsáidtear le haghaidh | 3D Printer |
| ráta athnuachana | 60Hz |
| scáileán tadhaill | Without |
| Ic liosta tiománaí | Built-in COG 6 source chips |
| cineál comhartha | eDP (4 Lanes) , eDP1.3 , HBR2 (5.4G/lane) , 40 pins Connector |
| soláthar voltais | 3.3V (Typ.) |
| uas. rátálacha | Storage Temp.: -20 ~ 60 °C Operating Temp.: 0 ~ 50 °C |
| B133HAN02.0 | AUO | 13.3 | 1920×1080 |
| B133XW01 V0 | AUO | 13.3 | 1366×768 |
| B133XW04 V0 | AUO | 13.3 | 1366×768 |
| G133I1-L01 | Innolux | 13.3 | 1280×800 |
| L5F30812P00 | Epson | 13.3 | 1024×768 |
| LP133WH1-TLB1 | LG Display | 13.3 | 1366×768 |
| LP133WH2-TLB2 | LG Display | 13.3 | 1366×768 |
| LP133X09-A2 | LG Display | 13.3 | 1024×768 |
| LQ13X32 | SHARP | 13.3 | 1024×768 |
| N133I7-L01 | Innolux | 13.3 | 1280×800 |